Wealden Tool Company Limited Down Cut

Online Catalogue

Router Cutters

Spiral Fluted

Down Cut

A range of high quality micro-grain solid carbide spiral downcut cutters primarily intended for use in CNC and fixed head routing machines. These specialist cutters offer high performance routing, with fine finish and high feed rates being prime advantages over straight flute cutters. In cases where carbide tip tools perform well, spiral routers will cut smoother and generally last up to 5 times longer. This extra tool life means fewer tool changes, less setup time and longer production runs. The cutters are suitable for use at speeds of 17,000 to 25,000 rpm and with feed rates of 6 to 10 metres per minute. It should be noted that the most common reason for premature wear and tool failure is insufficient feed rates.
All cutters are 2 flute except items marked # which are single flute.
More Info...

Part Number	A (mm)	A (inch)	B	C	D	Price inc VAT	Click to Buy
T4D3000	3.00	0.118	12.0mm	1/4"	50.8mm	£15.20	NO STOCK
T4D3175	3.18	1/8	12.7mm	1/4"	50.8mm	£15.20
T4D3967	3.97	5/32	12.7mm	1/4"	50.8mm	£15.20
T4D4000	4.00	5/32	14.0mm	1/4"	50.8mm	£15.20	NO STOCK
T4D4762	4.76	3/16	19.0mm	1/4"	50.8mm	£15.94
T4D5000	5.00	0.197	19.0mm	1/4"	50.8mm	£15.94
T8D5000	5.00	0.197	19.0mm	8mm	76.2mm	£20.50
T4D6000	6.00	15/64	19.0mm	1/4"	50.8mm	£16.50	NO STOCK
T8D6000A	6.00	15/64	19.0mm	8mm	76.2mm	£22.95
T8D6000B	6.00	15/64	25.0mm	8mm	76.2mm	£23.95
T4D6350	6.35	1/4	19.0mm	1/4"	63.5mm	£16.40
T2D7937	7.94	5/16	25.4mm	1/2"	76.2mm	£45.10
T8D8000B	8.00	5/16	25.0mm	8mm	76.2mm	£24.01
T8D8000S	8.00 #	5/16	25.0mm	8mm	76.2mm	£24.50
T8D8000C	8.00	5/16	32.0mm	8mm	76.2mm	£27.95
T2D8000A	8.00	5/16	25.0mm	1/2"	76.2mm	£43.10
T3D9525	9.53	3/8	31.7mm	3/8"	76.2mm	£43.01
T2D9525	9.53	3/8	31.7mm	1/2"	76.2mm	£43.10
T2D1000B	10.0	25.64	32.0mm	1/2"	76.2mm	£44.40
T2D1200C	12.0	15/32	38.0mm	1/2"	88.9mm	£46.30
T2D1270A	12.7	1/2	31.7mm	1/2"	76.2mm	£45.00
T2D1270C	12.7	1/2	38.1mm	1/2"	88.9mm	£46.00
T2D1270E	12.7	1/2	50.8mm	1/2"	88.9mm	£53.94