Wealden Tool Company Limited Up Cut

Online Catalogue

Router Cutters

Spiral Fluted

Up Cut

A range of high quality micro-grain 2 flute solid carbide spiral upcut cutters primarily intended for use in CNC and fixed head routing machines. These specialist cutters offer high performance routing, with fine finish and high feed rates being prime advantages over straight flute cutters. In cases where carbide tip tools perform well, spiral routers will cut smoother and generally last up to 5 times longer. This extra tool life means fewer tool changes, less setup time and longer production runs. The cutters are suitable for use at speeds of 17,000 to 25,000 rpm and with feed rates of 6 to 10 metres per minute. It should be noted that the most common reason for premature wear and tool failure is insufficient feed rates.
More Info...

Part Number	A (mm)	A (inch)	B	C	D	Price inc VAT	Click to Buy
T4U3000	3.00	0.118	12.0mm	1/4"	50.8mm	£15.20
T4U3175	3.18	1/8	12.7mm	1/4"	50.8mm	£15.20
T4U3967	3.97	5/32	12.7mm	1/4"	50.8mm	£15.20
T4U4000	4.00	5/32	14.0mm	1/4"	50.8mm	£15.20
T4U4762	4.76	3/16	19.0mm	1/4"	50.8mm	£15.94
T4U5000	5.00	0.197	19.0mm	1/4"	50.8mm	£15.94
T8U5000	5.00	0.197	19.0mm	8mm	76.2mm	£20.50
T4U6000	6.00	15/64	19.0mm	1/4"	50.8mm	£16.50
T8U6000A	6.00	15/64	19.0mm	8mm	76.2mm	£22.95
T8U6000B	6.00	15/64	25.0mm	8mm	76.2mm	£23.95
T4U6350	6.35	1/4	19.0mm	1/4"	63.5mm	£16.40
T2U7937	7.94	5/16	25.4mm	1/2"	76.2mm	£45.10
T8U8000B	8.00	5/16	25.0mm	8mm	76.2mm	£24.01
T8U8000C	8.00	5/16	32.0mm	8mm	76.2mm	£27.95
T2U8000A	8.00	5/16	25.0mm	1/2"	76.2mm	£43.10
T2U9525	9.53	3/8	31.7mm	1/2"	76.2mm	£43.01
T2U1000B	10.0	25/64	32.0mm	1/2"	76.2mm	£44.40
T2U1000L	10.0	25/64	40.0mm	1/2"	88.9mm	£47.00
T2U1200C	12.0	15/32	38.0mm	1/2"	88.9mm	£46.30
T2U1200L	12.0	15/32	54.0mm	1/2"	101.6mm	£54.52
T2U1270A	12.7	1/2	31.7mm	1/2"	76.2mm	£45.00
T2U1270C	12.7	1/2	38.1mm	1/2"	88.9mm	£46.00
T2U1270E	12.7	1/2	50.8mm	1/2"	88.9mm	£53.94