Online Catalogue    Router Cutters    Miscellaneous    Raise-A-Panel Set

Raise-A-Panel Set An increasingly common requirement these days is the production of mock panelling on solid timber or MDF panels for furniture manufacture. This operation is usually carried out using a template with a top bearing guided classic ogee cutter. Whilst the result is effective it does not resemble a true raised panel. Our unique new system uses two cutters which, with two passes using the same template, will produce an effect that more closely echos a traditional raised panel. Two sizes are available which produce either a 30mm or 40mm wide moulding and in both cases the depth of the moulded groove is 10-12mm. On this page are the two cutter sets. If you need just one of the cutters go to the Raise A Panel spares section. More Info & Spares...

Part Number Shank size Moulding width Profile cutter Raise cutter Price inc VAT Click to Buy T1652 1/4 30mm T1650 T1656   £56.20 T1654-8 8mm 30mm T1651-8 T1657-8   £56.20 T1658-1/2 1/2 30mm T1653½ T1659½   £56.20 T1664-8 8mm 40mm T1662-8 T1660-8   £64.88 T1668-1/2 1/2 40mm T1663½ T1661½   £64.88