Call us on: 01580 890500

Woodworking tooling for the professional

Raising Block

A two wing cutter block in high tensile strength alloy with easily replaceable TC profile inserts. Suitable for producing raised panels in all natural timbers and man made boards.
The block is supplied with profile number 1 blades, but a further 7 profiles may be fitted. These need to be ordered separately and two of each profile are required. The block is a top cut version which moulds the raise with the back of the panel flat on the table.
Manufactured to EN847-1/2 - suitable for HAND FEEDING.


Spare parts should be selected from the table above and ordered from the Spares and TC knives section.
Go to Spare parts pageX
Raising Block
Raising Block
Raising Block
Raising Block
  • Raising Block Thumbnail
  • Raising Block Thumbnail
  • Raising Block Thumbnail
  • Raising Block Thumbnail
Part
Number
Size
Maximum RPM
PriceDetailsBuy
Dia.HeightBore
F268180 180mm25mm30mm
7000
F268180
  • 160.93
F268183 180mm25mm1-1/4"
7000
F268183
  • 160.93
Replacement knives Replacement knives
F001104 Profile 1 knife (single) F001104
  • 32.22
F001130 Profile 2 knife (single) F001130
  • 32.22
F001131 Profile 3 knife (single) F001131
  • 32.22
F001132 Profile 4 knife (single) F001132
  • 32.22
F001133 Profile 5 knife (single) F001133
  • 32.22
F001134 Profile 6 knife (single) F001134
  • 32.22
F001135 Profile 7 knife (single) F001135
  • 32.22
F001136 Profile 8 knife (single) F001136
  • 32.22
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...