Page 11 - Router Catalogue 2021

WEALDEN TOOL
TCT ROUTER BITS Quality products - quality service
COM PAN Y

ACRYLIC PLASTICS

Specially ground for cutting acrylic, the polished flute design allows Down-Cut helical cutters are for use on fine acrylics, where the
for smooth feed rate, efficient chip clearance and a cleaner finish. downward cutting action will prevent vibration and component
Cutters are available in straight flute, helical up-cut and helical lifting. Up-Cut helical cutters give greater chip clearance when
down-cut in both single and two flute.Single flute solid carbide working with confined cuts.
cutters offer fast cutting and are especially suited to cutting low
melting point plastics.
Razor sharp cutting edge for effortless chip removal
The design of two flute cutters gives reduced contact with the
Helps prevent chip re-welding or adhering to the tool
material, plus gradual lead-in when first cutting and is the perfect
preparation before flame polishing of Perspex. Gives extended tool life
Provides exceptional cut quality

STRAIGHT FLUTE STC

Part No. D C1 d OL Flutes
mm mm shank mm

T4AS635CZ1 ----- 6.35 ----- 25 ----- 1/4" ----- 65 ------- 1
T4AS635AZ2------ 6.35 ----- 15 ----- 1/4" ----- 65 ------- 2
T4AS635CZ2------ 6.35 ----- 25 ----- 1/4" ----- 65 ------- 2
T8AS800CZ1 ----- 8.00 ----- 32 ----- 8mm ----- 80 ------- 1
T8AS800CZ2 ----- 8.00 ----- 32 ----- 8mm ----- 80 ------- 2

HELICAL FLUTE UP – CUT STC

Part No. D C1 d OL Flutes

mm mm shank mm

T4AU300AZ2 ----- 3.00 ----- 12 ----- 1/4" ----- 65 ------- 2
T4AU400AZ2------ 4.00 ----- 14 ----- 1/4" ----- 65 ------- 2
T4AU600BZ2------ 6.00 ----- 19 ----- 1/4" ----- 65 ------- 2
T4AU630AZ1------ 6.35 ----- 10 ----- 1/4" ----- 65 ------- 1
T4AU630BZ1------ 6.35 ----- 20 ----- 1/4" ----- 65 ------- 1
T8AU400AZ2 ----- 4.00 ----- 14 ----- 8mm ----- 80 ------- 2
T8AU600BZ2 ----- 6.00 ----- 19 ----- 8mm ----- 80 ------- 2
T8AU800BZ2 ----- 8.00 ----- 25 ----- 8mm ----- 80 ------- 2
T8AU800CZ1 ----- 8.00 ----- 30 ----- 8mm ----- 80 ------- 1

HELICAL FLUTE DOWN – CUT STC

Part No. D C1 d OL Flutes
mm mm shank mm

T4AD400AZ2------ 4.00 ----- 14 ----- 1/4" ----- 65 ------- 2
T4AD600BZ2------ 6.00 ----- 19 ----- 1/4" ----- 65 ------- 2
T8AD400AZ2 ----- 4.00 ----- 14 ----- 8mm ----- 80 ------- 2
T8AD600BZ2 ----- 6.00 ----- 19 ----- 8mm ----- 80 ------- 2
T8AD800CZ2 ----- 8.00 ----- 25 ----- 8mm ----- 80 ------- 2
T8AD800DZ1 ----- 8.00 ----- 30 ----- 8mm ----- 80 ------- 1

Orderline 01580 890500 9 Fax orders 01580 890222