Call us on: 01580 890500

Woodworking tooling for the professional

Aluminium Up Cut

A range of spiral SINGLE FLUTE up-cut solid tungsten carbide cutters specially ground for cutting aluminium up to 10mm in thickness.
The following paramaters should be used as a starting point guide when machining aluminium.
For sheet and thin profiles up to 3mm thickness:
cut dry at 14,000 rpm and 4-5 metres/minute.
For sheet and plate over 3mm thickness:
cut with a lubricant at 18,000 rpm and 1.5-2.5 metres/minute.

Aluminium Up Cut
Aluminium Up Cut
Aluminium Up Cut
Aluminium Up Cut
  • Aluminium Up Cut Thumbnail
  • Aluminium Up Cut Thumbnail
  • Aluminium Up Cut Thumbnail
  • Aluminium Up Cut Thumbnail
Part
Number
A (mm)A (inch)BCDPriceDetailsBuy
NCU0301203 3.00 0.11812mm3mm50mm NCU0301203
  • 15.06
NCU0401204 4.00 0.15712mm4mm50mm NCU0401204
  • 16.80
NCU0501705 5.00 0.19617mm5mm50mm NCU0501705
  • 21.48
NCU0602206 6.00 0.23622mm6mm60mm NCU0602206
  • 28.32
NCU0602706 6.00 0.23627mm6mm60mm NCU0602706
  • 30.84
NCU0802208 8.00 0.31522mm8mm70mm NCU0802208
  • 32.88
NCU0803208 8.00 0.31532mm8mm80mm NCU0803208
  • 35.28
NCU1003210 10.00 0.39432mm10mm80mm NCU1003210
  • 43.68
NCU1203212 12.00 0.47232mm12mm80mm NCU1203212
  • 61.56
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...