Call us on: 01580 890500

All our prices include UK VAT unless stated

Flush Groover

Grooving cutters with shank-mounted bearings and a flush bottom. Since the cutter does not have a bearing or nut below the cutting edge, it is possible to cut down into rebates and above a sub-base etc. This is especially useful for working on flooring in situ where a joint or false tongue is required. The cutter is supplied with a bearing for a 10.5mm deep groove, additional alternative bearings may be purchased.
The 6.35mm groover is suitable for false tongue work using 6mm ply as the tongue.
N.B. These cutters are only available in 8mm shank.

Flush Groover
Flush Groover
Flush Groover
Flush Groover
  • Flush Groover Thumbnail
  • Flush Groover Thumbnail
  • Flush Groover Thumbnail
  • Flush Groover Thumbnail
Part
Number
ABCDEPriceDetailsBuy
T5310B-8 4.00mm40mm8mm50mm10.5mm T5310B-8
  • 36.24
T5313B-8 6.35mm40mm8mm50mm10.5mm T5313B-8
  • 36.24
T5315B-8 8.00mm40mm8mm50mm10.5mm T5315B-8
  • 36.24
Alternative bearings Alternative bearings
TB655 --------12.0mm TB655
  • 2.40
TB908Assupplied 10.5mm TB908
10.5mm
  • 3.65
TB910 --------9.0mm TB910
  • 3.65
TB912 --------8.0mm TB912
  • 3.65
TB913 --------7.0mm TB913
  • 3.65
TB915 --------6.0mm TB915
  • 3.44
TB917 --------5.0mm TB917
  • 4.12
Replacement parts Replacement parts
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...