Call us on: 01580 890500

All our prices include UK VAT unless stated

Trim Repair

A two flute bearing guided cutter for the removal of damaged edge trim or for producing rebates. As supplied, the cutter will remove or rebate 2mm and additional bearings are available to vary this between 0mm to 3.5mm (see the list below).
The first pass produces a rebate using the bottom mounted bearing, then a second pass with the shank mounted bearing running on the rebate trims to remove the rebate.
May also be used to enlarge shaped apertures using the 2 stage procedure.

Trim Repair
Trim Repair
Trim Repair
Trim Repair
  • Trim Repair Thumbnail
  • Trim Repair Thumbnail
  • Trim Repair Thumbnail
  • Trim Repair Thumbnail
Part
Number
ABCDEPriceDetailsBuy
T8185B-8 16.0mm26mm8mm50mm2.0mm T8185B-8
  • £39.60
Spares & bearings Spares & bearings
TB655 16.0mm bearing for shank end TB655
  • £2.40
TC6800 Locking collar 8mm TC6800
  • £2.04
TB216 Bearing for 0mm rebate TB216
  • £2.50
TB413 Bearing for 0.5mm rebate TB413
  • £3.08
TB213 Bearing for 1.5mm rebate TB213
  • £2.45
TB212 Bearing for 2.0mm rebate as supplied TB212
  • £2.40
TB211 Bearing for 2.5mm rebate TB211
  • £2.29
TB210 Bearing for 3.0mm rebate TB210
  • £2.40
TB209 Bearing for 3.5mm rebate TB209
  • £2.40
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...