Call us on: 01580 890500

All our prices include UK VAT unless stated

Compression 1 Flute

A range of single flute compression spiral cutters (1 downcut + 1 upcut flute) in solid tungsten carbide to produce improved finish on the top and the bottom of the cut. Single flute cutters offer good flute clearance and increased stiffness which reduces vibration and allows for higher feed rates. This range of cutters are offered with reasonably short cut lengths to further reduce vibration. Suitable for ply and other man made boards as well as solid timber.
Speed 24 00rpm, Feed 3-4 metres per minute on a depth of cut upto 2 x diameter of the cutter.

Compression 1 Flute
Compression 1 Flute
Compression 1 Flute
Compression 1 Flute
  • Compression 1 Flute Thumbnail
  • Compression 1 Flute Thumbnail
  • Compression 1 Flute Thumbnail
  • Compression 1 Flute Thumbnail
Part
Number
A (mm)A (inch)BCDEPriceDetailsBuy
TGC031230 3.000.11812.0mm3mm50.0mm3.0mm TGC031230
  • 20.16
TGC041540 4.005/3215.0mm4mm50.0mm4.0mm TGC041540
  • 22.80
TGC051745 5.000.19717.0mm5mm60.0mm4.5mm TGC051745
  • 25.08
TGC062250 6.0015/6422.0mm6mm60.0mm5.0mm TGC062250
  • 31.92
TGC082260 8.005/1622.0mm8mm70.0mm6.0mm TGC082260
  • 34.80
TGC083260 8.005/1632.0mm8mm70.0mm6.0mm TGC083260
  • 39.60
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...