Call us on: 01580 890500

All our prices include UK VAT unless stated

Compression - Performance Pro

High performance cutters with micro polished PCD tips on high rigidity Densimet/Triamet® shanks.

These high feed rate production cutters feature a high ridigity body and segmented spiral flutes with PCD tips in up-down shear configuration. Designed for nesting and production sizing on MFC (furniture board), this configuration gives a good finish on both edges of the board. PCD outlives tungsten carbide by well over 40-60 times. Extended life cuts down set-up time and PCD offers reliable high quality finish and accuracy on abrasive materials, which take the edge off tungsten carbide cutters.
All sizes are available in right-hand rotation (RH), with a few sizes also available in left-hand rotation (LH).

Compression - Performance Pro
Compression - Performance Pro
Compression - Performance Pro
Compression - Performance Pro
  • Compression - Performance Pro Thumbnail
  • Compression - Performance Pro Thumbnail
  • Compression - Performance Pro Thumbnail
  • Compression - Performance Pro Thumbnail
Part
Number
ØDC1ØdOLC2RH/LHPriceDetailsBuy
NSC11208019 8.0mm18mm12mm70mm5mm
RH
NSC11208019
  • £174.60
NSC11208021 8.0mm21mm12mm70mm5mm
RH
NSC11208021
  • £180.72
NSC11208025 8.0mm25mm12mm70mm5mm
RH
NSC11208025
  • £217.92
NSC11210025 10.0mm25mm12mm70mm5mm
RH
NSC11210025
  • £219.84
NSC11210033 10.0mm33mm12mm90mm5mm
RH
NSC11210033
  • £229.80
NSC11212027 12.0mm27mm12mm80mm5mm
RH
NSC11212027
  • £234.84
NSC11616030 16.0mm30mm16mm90mm5mm
RH
NSC11616030
  • £259.92
NSC21616030 16.0mm30mm16mm90mm5mm
LH
NSC21616030
  • £265.92
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...