A range of low cost two wing groover assemblies ideally suited to cutting weatherseal slots. These cutters have a small overall diameter making them suitable for use in small hand routers. Their light weight means they can readily be used for in-situ grooving, and cuts into internal corners leave a minimum radius to be cleaned out by hand. The design of the cutter allows the groove to be positioned against the bottom of the rebate if required. The cutters will be supplied with TB910 bearing as standard, giving a groove depth "E" of 6mm. The groove depth may be varied by selecting alternative bearings, (click Optional/replacement parts... for details).
Optional bearings or spare parts should be selected from these tables and then ordered from the Bearings and Spares section of the catalogue.Go to Bearings & Spares pageX