Call us on: 01580 890500

Woodworking tooling for the professional

Engraving Two Flute

A range of TC tipped two flute cutters for use in CNC machines for engraving lettering etc. These cutters do not have a chip-limiting design and are therefore only suitable for CNC machines and not for use in hand held or table mounted routing machines.
The bottom of the V will have a small flat of 0.75mm.

Engraving Two Flute
Engraving Two Flute
Engraving Two Flute
  • Engraving Two Flute Thumbnail
  • Engraving Two Flute Thumbnail
  • Engraving Two Flute Thumbnail
Part
Number
ABCDEFPriceDetailsBuy
T1990 22.6mm32mm1/4"38mm16.0mm90° T1990
  • £25.56
T1991-8 22.6mm32mm8mm38mm16.0mm90° T1991-8
  • £25.56
T1992 18.5mm32mm1/4"38mm9.2mm120° T1992
  • £22.32
T1993-8 18.5mm32mm8mm38mm9.2mm120° T1993-8
  • £22.32
T1994 16.6mm32mm1/4"38mm4.3mm150° T1994
  • £19.20
T1995-8 16.6mm32mm8mm38mm4.3mm150° T1995-8
  • £19.20
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...