Call us on: 01580 890500

Woodworking tooling for the professional

Smoke Seal

A range of cutters for grooving doors and frames to accept smoke seals. All cutters are bearing guided and fitted with dust shields. The design of the cutter allows the groove to be positioned against the bottom of the rebate if required. They are available in 8mm, 3/8" and 1/2" shank sizes only. The bearing supplied will produce the correct depth "G" of 3mm for the seal; other bearings are available (click Optional/replacement parts...) for details.


Optional bearings or spare parts should be selected from these tables and then ordered from the Bearings and Spares section of the catalogue.
Go to Bearings & Spares pageX
Smoke Seal
Smoke Seal
Smoke Seal
  • Smoke Seal Thumbnail
  • Smoke Seal Thumbnail
  • Smoke Seal Thumbnail
Part
Number
ABCDEFGPriceDetailsBuy
T5830-8 45mm8.0mm8mm58mm2.75mm5.5mm3.0mm T5830-8
  • £44.90
T5830-3/8 45mm8.0mm3/8"58mm2.75mm5.5mm3.0mm T5830-3/8
  • £44.90
T5830-1/2 45mm8.0mm1/2"82mm2.75mm5.5mm3.0mm T5830-1/2
  • £44.90
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...