Call us on: 01580 890500

Woodworking tooling for the professional

Chipbreaker Up-Cut

A range of three flute chipbreaker spiral cutters, which give high feed rates with low noise. The spiral chipbreaker design gives a fine serrated finish with good chip clearance and low chip loading. In many situations the finish given may be acceptable without any further machining operations.
Most cutters are supplied with a locator circlip, which may be removed if not required.
All cutters are 3 flute except items marked ## which are 2 flute.

Chipbreaker Up-Cut
Chipbreaker Up-Cut
Chipbreaker Up-Cut
Chipbreaker Up-Cut
  • Chipbreaker Up-Cut Thumbnail
  • Chipbreaker Up-Cut Thumbnail
  • Chipbreaker Up-Cut Thumbnail
  • Chipbreaker Up-Cut Thumbnail
Part
Number
A (mm)A (inch)BCDPriceDetailsBuy
T5UC208060 6.0mm ##15/64"22mm8mm70mm T5UC208060
  • 35.40
T5UC308080L 8.0mm0.314932mm8mm80mm T5UC308080L
  • 47.23
T5UC310100 10.0mm0.393732mm10mm80mm T5UC310100
  • 49.56
T5UC312120 12.0mm0.472432mm1/2"80mm T5UC312120
  • 77.32
T5UC312120X 12.0mm0.472452mm1/2"100mm T5UC312120X
  • 93.43
T5UC314140X 14.0mm0.551252mm14mm100mm T5UC314140X
  • 101.18
T5UC316160X 16.0mm0.629972mm16mm120mm T5UC316160X
  • 127.70
T5UC318180L 18.0mm0.708672mm18mm120mm T5UC318180L
  • 154.22
T5UC320200 20.0mm0.787452mm20mm100mm T5UC320200
  • 137.70
T5UC320200X 20.0mm0.7874102mm20mm150mm T5UC320200X
  • 180.00
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...