Call us on: 01580 890500

All our prices include UK VAT unless stated

Torus Bead

This two flute cutter produces a traditional pattern torus bead, commonly used for skirting boards etc. The cutter is supplied with a guide bearing to control the depth to produce a full bead.
This is a large cutter and needs to be used with care: it should preferably be used in a fixed machine and, when cutting difficult timbers, use two passes to achieve the full depth.


Spare parts should be selected from this table and then ordered from the Bearings and Spares section of the catalogue.
Go to Bearings pageX
Torus Bead
Torus Bead
Torus Bead
  • Torus Bead Thumbnail
  • Torus Bead Thumbnail
  • Torus Bead Thumbnail
Part
Number
ABCDEPriceDetailsBuy
T2540B-1/2 13.5mm40mm1/2"40mm37mm T2540B-1/2
  • £44.40
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...