Call us on: 01580 890500

Woodworking tooling for the professional

Edge Reed

A bearing guided two flute cutter for producing decorative edge cuts. Produces an attractive edge mould for picture frame mouldings, table tops etc. or for any application where a square edge needs relieving. To enable the guide bearing to follow the edge, the minimum dimension "F" must be maintained.


Spare parts should be selected from this table and then ordered from the Bearings and Spares section of the catalogue.
Go to Bearings pageX
Edge Reed
Edge Reed
Edge Reed
  • Edge Reed Thumbnail
  • Edge Reed Thumbnail
  • Edge Reed Thumbnail
Part
Number
ABCDEFPriceDetailsBuy
T2832 3.2mm19mm1/4"30mm4mm24mm T2832
  • £21.70
T2848 4.8mm19mm1/4"30mm4mm24mm T2848
  • £21.70
T2864 6.4mm20mm1/4"30mm4mm25mm T2864
  • £23.60
T2864-1/2 6.4mm20mm1/2"36mm4mm25mm T2864-1/2
  • £23.60
T2895-1/2 9.5mm20mm1/2"36mm4mm25mm T2895-1/2
  • £23.60
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...