Call us on: 01580 890500

Woodworking tooling for the professional

Thumb Ovolo

A two flute 1/2" shank cutter to produce a traditional elliptical ovolo profile. This cutter is generally used for moulding skirtings and architraves etc. but is also suitable to produce decorative mouldings on table tops, dressers etc. The cutter is supplied with a bearing to give a 4mm quirk. Alternative bearings may be selected from the table (click the Optional bearings... link) to vary the quirk dimension "G". The bearing assembly may be completely removed, making the cutter suitable for panel work etc. This large cutter should be used at 16,000 rpm maximum.


Optional bearings should be selected from this table and then ordered from the Bearings and Spares section of the catalogue.
Go to Bearings page
X
Thumb Ovolo
Thumb Ovolo
Thumb Ovolo
  • Thumb Ovolo Thumbnail
  • Thumb Ovolo Thumbnail
  • Thumb Ovolo Thumbnail
Part
Number
ABCDEFPriceDetailsBuy
T1369-1/2 20.0mm8mm1/2"40mm14mm59mm T1369-1/2
  • £34.45
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...