Call us on: 01580 890500

All our prices include UK VAT unless stated

Rougher Up Cut

Three-Flute Solid Carbide Spiral
Roughing cutters are designed for high feed rates on CNC routers in dense materials such as hardwoods and plywood, when surface finish is not important. The rougher bit makes the first cut, followed by a second cut using a profile type tool. This cutter will produce a rippled edge to the cut. It is extremely quiet and smooth in operation, even with heavy cuts and high feed rates. It should be noted that the most common reason for premature wear is insufficient feed rates and worn collets are the main cause of tool breakage.

Rougher Up Cut
Rougher Up Cut
  • Rougher Up Cut Thumbnail
  • Rougher Up Cut Thumbnail
Part
Number
A (mm)A (inch)BCDPriceDetailsBuy
T8UR8000A 8.05/1625.0mm8mm76.2mm T8UR8000A
  • £52.08
T8UR8000B 8.05/1632.0mm8mm80mm T8UR8000B
  • £52.08
T9UR1000A 10.025/6425.0mm10mm76.2mm T9UR1000A
  • £47.88
T9UR1000B 10.025/6432.0mm10mm76.2mm T9UR1000B
  • £65.76
T2UR1270A 12.71/225.0mm1/2"76.2mm T2UR1270A
  • £81.84
T2UR1270B 12.71/232.0mm1/2"76.2mm T2UR1270B
  • £79.20
T2UR1270E 12.71/252.0mm1/2"101.6mm T2UR1270E
  • £95.64
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...