A range of cutters for grooving windows and frames to accept Aquamac 63 seals. All cutters are bearing guided and fitted with dust shields. The design of the cutter allows the groove to be positioned against the bottom of the rebate if required. They are available in 8mm, 3/8" and 1/2" shank sizes only. The bearing supplied will produce the correct depth "G" of 3mm for the seal, other bearings are available (click Optional/replacement parts... for details).
Optional bearings or spare parts should be selected from these tables and then ordered from the Bearings and Spares section of the catalogue.Go to Bearings & Spares pageX