USE OF
CUTTERSThe profile cutter is used to mould the profile on to the rails and stiles, and at the same time cut a groove to accommodate the panelling which may be ply, solid fielded timber, close boarding etc. The scribe cutter moulds the ends of the rails to produce a mating profile to the stiles. This method of construction produces a strong joint with a long glue line and allows doors to be produced very quickly and with good repetitive accuracy. The
cutters are suitable for machines with a power input of at least 750 watts.
These
cutters are best used in conjunction with a
router table, however they may be used freehand with the help of jigs. The application sheet supplied with the
cutters details jigs and other set-up information to enable the rapid production of accurate joints. The application sheet is also available separately on request.
IMPORTANT: These are large
cutters and you should ensure that they are suitable for use in your routing machine.
X