1/4" Shank

A range of straight cutters which are all two flute except T201W and T201.5S marked ## which are a single flute with Solid TC cutting blades. These general purpose cutters are suitable for grooving, dadoing, rabbeting etc. Please note the comments in the "using the router" section under the "Safe Use" menu item. Particular care should be taken when using long series cutters. All sizes are suitable for plunge cutting, with sizes above 9mm diameter having an additional centre carbide tip to ensure a faster and cleaner cut when plunging. When selecting cutters always choose the shortest cutter that will give the depth you require. Shorter bits cut cleaner with less noise and give a longer life.