Call us on: 01580 890500

All our prices include UK VAT unless stated

2.8mm Groover

A cutter to produce a 2.8mm wide groove that will suit many types of sealing strip which require a 3mm nominal groove. The design of the cutter allows the groove to be cut flush with the bottom of the rebate. The cutter is supplied with a bearing to set "E" the depth of cut, to 6mm. Other bearings may be selected to vary this depth, (click Optional/replacement parts... for details).


Optional bearings or spare parts should be selected from these tables and then ordered from the Bearings and Spares section of the catalogue.
Go to Bearings & Spares pageX
2.8mm Groover
2.8mm Groover
2.8mm Groover
  • 2.8mm Groover Thumbnail
  • 2.8mm Groover Thumbnail
  • 2.8mm Groover Thumbnail
Part
Number
ABCDEPriceDetailsBuy
T5850-8 40mm2.8mm8mm58mm6mm T5850-8
  • £45.60
T5850-3/8 40mm2.8mm3/8"58mm6mm T5850-3/8
  • £45.60
T5850-1/2 40mm2.8mm1/2"82mm6mm T5850-1/2
  • £45.60
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...