Call us on: 01580 890500

All our prices include UK VAT unless stated

3/8" Shank Straight

A range of straight two flute cutters in 3/8" shank. These general purpose cutters are suitable for grooving, dadoing, rabbeting etc. Please note the comments in the "using the router" section under the "Safe Use" menu item. Particular care should be taken when using long series cutters. All sizes are suitable for plunge cutting, with sizes above 9mm diameter having an additional centre carbide tip to ensure a faster and cleaner cut when plunging. When selecting cutters always choose the shortest cutter that will give the depth you require. Shorter bits cut cleaner with less noise and give a longer life.


Our straight cutter range has prefix and suffix codes which indicate the type of cutter as shown.X
3/8
3/8" Shank Straight
  • 3/8
  • 3/8
Part
Number
A (mm)A (inch)BCDPriceDetailsBuy
T1206.4M 6.31/415mm3/8"38mm T1206.4M
  • 10.20
T1208M 8.05/1620mm3/8"38mm T1208M
  • 11.28
T1209.5M 9.53/820mm3/8"38mm T1209.5M
  • 11.52
TX1209.5M 9.53/838mm3/8"38mm TX1209.5M
  • 14.76
T1212.7M 12.71/220mm3/8"38mm T1212.7M
  • 12.00
T1216M 16.05/820mm3/8"38mm T1216M
  • 15.36
T1219M 19.03/420mm3/8"38mm T1219M
  • 15.36
T1220.5M 20.513/1620mm3/8"38mm T1220.5M
  • 18.12
T1225.4M 25.41.020mm3/8"38mm T1225.4M
  • 19.68
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...