Call us on: 01580 890500

All our prices include UK VAT unless stated

Classic Panel Guided

Two fluted panel cutter with a top mounted bearing. The bearing is the same diameter as the cutter and enables top mounted templates to be used when applying decorative moulds to panels etc. The cove on the bottom of the cutter produces a deeper mould than the classic ogee T1642B.


Spare parts should be selected from this table and then ordered from the Bearings and Spares section of the catalogue.
Go to Bearings & Spares pageX
Classic Panel Guided
Classic Panel Guided
Classic Panel Guided
  • Classic Panel Guided Thumbnail
  • Classic Panel Guided Thumbnail
  • Classic Panel Guided Thumbnail
Part
Number
ABCDEFPriceDetailsBuy
T1622B 22mm12.7mm1/4"40mm4mm5.5mm T1622B
  • £29.64
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...