Call us on: 01580 890500

All our prices include UK VAT unless stated

Door Seal

A range of cutters for grooving doors and frames to accept door seals. All cutters are bearing guided and fitted with dust shields. The design of the cutter allows the groove to be positioned against the bottom of the rebate if required. They are available in 8mm, 3/8" and 1/2" shank sizes only.
The T5810 door seal cutter is suitable for the Aquamac 21 seal and the T5812 door seal has a smaller recess (dimension "B") for the seal and suits Slotseal and Exitex seals. The bearing supplied will produce the correct depth "G" of 3mm for the seal, other bearings are available (click Optional/replacement parts... for details).


Optional bearings or spare parts should be selected from these tables and then ordered from the Bearings and Spares section of the catalogue.
Go to Bearings & Spares pageX
Door Seal
Door Seal
Door Seal
  • Door Seal Thumbnail
  • Door Seal Thumbnail
  • Door Seal Thumbnail
Part
Number
ABCDEFGPriceDetailsBuy
T5810-8 46mm12.0mm8mm58mm2.80mm6.0mm3.0mm T5810-8
  • £53.76
T5810-3/8 46mm12.0mm3/8"58mm2.80mm6.0mm3.0mm T5810-3/8
  • £53.76
T5810-1/2 46mm12.0mm1/2"82mm2.80mm6.0mm3.0mm T5810-1/2
  • £53.76
T5812-8 46mm10.8mm8mm58mm2.80mm6.0mm3.0mm T5812-8
  • £53.76
T5812-3/8 46mm10.8mm3/8"58mm2.80mm6.0mm3.0mm T5812-3/8
  • £53.76
T5812-1/2 46mm10.8mm1/2"62mm2.80mm6.0mm3.0mm T5812-1/2
  • £53.76
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...