Call us on: 01580 890500

All our prices include UK VAT unless stated

Mini Mould Ripple Sunk

These cutter heads are for use with the Mini Mould range of arbors. They can be used with or without bearings. The matching bearing gives the optimum depth of cut on all cutters except Vee types where it gives the maximum cut depth. Other bearings are available to alter the cutting depth. Bearings and arbors need to be ordered separately.


Optional bearings should be selected from this table and then ordered from the Bearings and Spares section of the catalogue.
Go to Bearings pageX
Mini Mould Ripple Sunk
Mini Mould Ripple Sunk
Mini Mould Ripple Sunk
  • Mini Mould Ripple Sunk Thumbnail
  • Mini Mould Ripple Sunk Thumbnail
  • Mini Mould Ripple Sunk Thumbnail
Part
Number
ABCDBearingBearing SuppliedPriceDetailsBuy
T3472 19mm3.5mm8mm32.8mmTB915 T3472
  • £25.80
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...