Call us on: 01580 890500

All our prices include UK VAT unless stated

Mini Mould Sunk Flute

These cutter heads are for use with the Mini Mould range of arbors. They can be used with or without bearings. The matching bearing gives the optimum depth of cut on all cutters except Vee types where it gives the maximum cut depth. Other bearings are available to alter the cutting depth. Bearings and arbors need to be ordered separately.


Optional bearings should be selected from this table and then ordered from the Bearings and Spares section of the catalogue.
Go to Bearings pageX
Mini Mould Sunk Flute
Mini Mould Sunk Flute
Mini Mould Sunk Flute
  • Mini Mould Sunk Flute Thumbnail
  • Mini Mould Sunk Flute Thumbnail
  • Mini Mould Sunk Flute Thumbnail
Part
Number
ABCDEBearingPriceDetailsBuy
T3480 3.2mm8mm8mm31.6mm1.8mmTB915 T3480
  • £29.28
T3436 4.0mm10mm8mm33.3mm2.6mmTB915 T3436
  • £27.84
T3482 6.4mm15mm8mm37.2mm4.6mmTB915 T3482
  • £29.28
Hints & Tips
Cutter manufacturers will tell you, with good reason, that the router owes its versatility to the enormous range of cutters available for itRead more...